Sintra Gathered Blouse, Pattern
$10.40
This is a pattern for a voluminous, straight-cut blouse. The front and back have yokes with darts sewn into the yoke seams. The top edges of the front and back are gathered. The garment is gathered above the waist with elastic tape. There is an additional marked gathering line just below the waist. The blouse has no side seams. The sleeve cap is gathered, and the sleeve ends at the wrist. The lower edge of the sleeve is gathered with elastic tape inserted into a casing. The center front closure is edge-to-edge (butt closure) with fabric loops and fabric-covered buttons. The blouse length hits the hipline.
In the photo, the blouse is styled with Trousers Fusion.
In the photo Elena: bust 88 cm, waist 70.5 cm, hips 91.5 cm, height 167 cm
Selected size 38, height 168
After payment, links to download the following documents will appear in your Personal Account:
- Detailed instructions with cutting layouts, interfacing scheme and step-by-step photos and description of the sewing process
- The PDF pattern in your chosen size and height in universal A4/Letter format ( includes extra 10mm margins to fit both A4 and US Letter paper). The size and the height of the pattern are indicated in the name of the document.
- The PDF pattern in your chosen size and height in A0 plotter format (841mm / 33.1″ wide for roll printing). The size and the height of the pattern are indicated in the name of the document.
TOTAL EASE ALLOWANCE, cm:
LENGTH, cm:
RECOMMENDED FABRICS:
For sewing this model, it is recommended to choose thin, soft, non-stretch or low-stretch, transparent or semi-transparent fabrics. Batiste, embroidered batiste, dress-weight fabrics, silk, chiffon are well suited.
The blouse in the Elenapatternstudio photo is made of embroidered batiste with a density of 142 g/m², composition: 100% cotton. Thin batiste was used for making the bias binding for finishing the front edges and neckline.
YOU WILL NEED:
- Main fabric, taking into account a 10% allowance for possible shrinkage, m:
Width 130 cm excluding scallops
Cutting direction: Front and Back – on the cross-grain, Sleeves – on the bias
Width 120 cm excluding scallops
Cutting direction: All pieces – on the cross-grain
- Thin batiste matching the main fabric color for making the bias binding for finishing the front edges and neckline ~ 60 cm in length and 60 cm wide.
- Stitched bias-cut fusible stay tape with stitch reinforcement, 10-12 mm wide ~ 2 m.
- Straight-grain fusible stay tape, 15 mm wide ~ 1 m.
- Elastic tape (elastic), 10 mm wide ~ 2 m (one gathering level), 3.2 m (two gathering levels).
- Buttons, 11 mm diameter – 9-15 pcs.
- Threads to match the fabric – 5 spools (4 for the overlocker, 1 for the sewing machine).
- Universal sewing machine and overlocker needles No. 70.
NECESSARY EQUIPMENT:
- Sewing machine
- Overlocker
- Iron with steam function
- Ironing table or ironing board
- Special tool for turning bias tubing right side out (loop turner).
Only logged in customers who have purchased this product may leave a review.
There are no reviews yet.